Features

XEBEC Back Burr Cutter
  • Made of micro-grain cemented carbide
    High cutting performance and long tool life
  • Available in 2 variants: Heat-resistant AlTiCrN coated variant and sharp-edged uncoated variant
    AlTiCrN coated variant is suitable for difficult-to-cut materials such as medium tensile steel (S45C, AISI1045, C45), stainless steel, titanium and Inconel alloys. Uncoated variant features sharp cutting edges that are effective in preventing built-up edges and formation of secondary burrs, and it is suitable for plastics and aluminum (uncoated variant is available only in Regular Type).
  • Blade shape is optimized for deburring
    Helical cutting edges for optimal cutting performance and prevention of secondary burrs
  • 3 types of neck lengths
    Available in three types of neck lengths: Short Type, Regular Type, and Straight Type, making this tool suitable for wide range of edges. 
    Short Type features 3 blades and a short neck length (only 3 times the Cutter diameter), enabling high feed rate and long tool life.
    Regular Type and Straight Type feature long neck lengths that enable long reach, making deburring of deep holes possible. Regular Type has the neck length 5 times of the Cutter diameter, and Straight Type 15 times of the Cutter diameter.
XEBEC Path
  • Optimal tool paths for deburring
    Achieves uniform edge break without formation of secondary burrs.
  • Supports deburring of various types of drilled holes such as orthogonal and off-center cross holes 
    XEBEC Path enables deburring of  orthogonal cross holes and off-center cross holes (examples: Target Edges to Deburr, Figure 1) which were previously difficult to deburr.
  • Longer tool life for lower running costs
    The optimal tool path enables deburring with the minimum amount of cutting, thereby reducing tool wear caused by heat. Furthermore, the contact point of the cutting blades with the workpiece changes constantly during deburring, achieving long tool life.
  • Quick deburring with minimum tool movement
    Enables deburring in 1/5 - 1/10 the machining time required with a spring-loaded deburring tools.
  • Enables deburring of multiple holes
    The long neck length enables deburring of multiple holes with one Cutter.