Specifications of Cross Hole Types

Cross Hole Types

Type A: Orthogonal Cross Hole - Outer Diameter (Cutter Insertion Hole < Outer Diameter)

Type B: Orthogonal Cross Hole - Inner Diameter (Cutter Insertion Hole ≦ Cross Hole)

Type C: Flat Surface Hole

Type D and E: Angled Cross Hole (On-center) - Outer/Inner Diameter

Type D and E: Angled Cross Hole (Off-center) - Outer/Inner Diameter

Type F: Angled Surface Hole

Type G and H: Slotted Hole Parallel with Cross Hole Axis (On-center) - Outer/Inner Diameter (ar=0°)

Type G and H: Slotted Hole Parallel with Cross Hole Axis (Off-center) - Outer/Inner Diameter (ar=0°)

Type G and H: Slotted Hole Parallel with Cross Hole Axis Aligned with X-axis (ar＝90°/-90°)

Type I and J: Slotted Hole Perpendicular with Cross Hole Axis (On-center) - Outer/Inner Diameter

Type I and J: Slotted Hole Perpendicular with Cross Hole Axis (Off-center) - Outer/Inner Diameter

Type I and J: Slotted Hole Perpendicular with Cross Hole Axis Aligned with X-axis (ar＝90°/-90°)

Type K: Orthogonal Cross Hole - Inner Diameter (Cutter Insertion Hole > Cross Hole)

Type K: Orthogonal Cross Hole Aligned with X-axis (ar＝90°/-90°)

Type L: Broken Hole - Inner Diameter (Cutter Insertion Hole ≦ Cross Hole)

Type M: Broken Hole - Inner Diameter (Cutter Insertion Hole ＞ Cross Hole)

Type N: Angled Cross Hole Inner Diameter (On-center) - (Cutter Insertion Hole > Cross Hole)

Type N: Angled Cross Hole Inner Diamater (Off-center) - (Cutter Insertion Hole > Cross Hole)

Type P: Tapped Orthogonal Cross Hole (Cutter Insertion Hole ≦ Cross Hole)

Type Q: Tapped Flat Surface Hole

Type R: Tapped Angled Surface Hole